50 Mesh Stainless Steel Wire Mesh

50 mesh X 0.22 mm X 1 m X 30 m

  • 50 mesh stainless steel screen
  • 50 mesh stainless steel wire mesh

The specifications of 50 mesh stainless steel wire mesh

Material: 304 Weaving Method: Plain Weave
Mesh: 50 mesh Wire Diameter: 0.22 mm
Width: 1 m Length: 30 m
Open Area: 32% Aperture: 0.288 mm

50 mesh stainless steel wire mesh indicates 50 mesh (holes) within a lineal inch.
Other wire diameters: 0.15 mm, 0.18 mm, 0.20 mm.
50 mesh stainless steel wire mesh thin wire diameter is 0.025mm, aperture is 0.483mm, material is 316L.
The characteristics of stainless steel wire mesh:
Stainless steel is wear-resisting, heat-resisting, and corrosion resisting. Just because of these characteristics, the wire mesh made of stainless steel is extensively used in mining, chemical industry and pharmaceutical industry.
Our stainless steel wire mesh products are generally made of stainless steel Type 302, Type 304, Type 304L, Type 316, Type 316L etc.
Plain weave: This is the most commonly used weave. Each weft wire passes over one and under one warp wire, and each warp wire passes over one and under one weft wire, Warp and weft wires generally have the same diameter.
Packing method: Inside with paper pipe, outside with water-proof paper and plastic paper.
Packing: Wooden case.
If you need a little 50 mesh stainless steel wire mesh, we can supply you with minimum order 1 lineal meter.
Anping Hairong Wire Mesh Factory produces wire cloth in all kinds of forms. The weaving is determined according to our customers, specific requirements, such as the material, the wire diameter, the size of the mesh, width and length.