300 Mesh Stainless Steel Wire Mesh

300 mesh X 0.04 mm X 1 m X 30 m

  • 300 mesh stainless steel screen
  • 300 mesh stainless steel wire mesh

The specifications of 300 mesh stainless steel wire mesh

Material: 316 L Weaving Method: Twill Weave
Mesh: 300 mesh Wire Diameter: 0.04 mm
Width: 1 m Length: 30 m
Open Area: 28% Aperture: 0.045 mm

300 mesh stainless steel wire mesh indicates 300 mesh (holes) within a lineal inch.
The other weaving method is plain weave, wire diameter is 0.03mm, is used in screen printing plate painting.
The characteristics of stainless steel wire mesh:
Stainless steel is wear-resisting, heat-resisting, and corrosion resisting. Just because of these characteristics, the wire mesh made of stainless steel is extensively used in mining, chemical industry and pharmaceutical industry.
Our stainless steel wire mesh products are generally made of stainless steel Type 302, Type 304, Type 304L, Type 316, Type 316L etc.
Twill weave: Each weft wire passes over two and under two warp wires, and each warp wire passes over and under two weft wires. The wire diameter for both(warp and weft)is mostly the same.
Packing method: Inside with paper pipe, outside with water-proof paper and plastic paper.
Packing: Wooden case.
If you need a little 300 mesh stainless steel wire mesh, we can supply you with minimum order 1 lineal meter.
Anping Hairong Wire Mesh Factory produces wire cloth in all kinds of forms. The weaving is determined according to our customers, specific requirements, such as the material, the wire diameter, the size of the mesh, width and length.