80 Mesh Brass Wire Mesh

80 mesh X 0.10 mm X 1 m X 30 m

  • 80 mesh brass wire mesh
  • 80 mesh brass wire

The specifications of 80 mesh brass wire mesh

Material: H 65 Weaving Method: Plain Weave
Mesh: 80 mesh Wire Diameter: 0.12 mm
Width: 1 m Length: 30 m
Open Area: 39% Aperture: 0.198 mm

80 mesh brass wire mesh indicates 80 mesh (holes) within a lineal inch.
The characteristics of brass wire mesh:
Brass is an alloy of copper and zinc. It has much better abrasion resistance, better corrosion resistance and lower electrical conductivity as compared with copper.
Brass wire mesh are frequently used in sieving diversified pellet, powder, porcelain clay and glass, chinaware printing, filtering liquid and gas.
We are capable of supplying brass wire mesh from 1-200 mesh.
Plain weave: This is the most commonly used weave. Each weft wire passes over one and under one warp wire, and each warp wire passes over one and under one weft wire, Warp and weft wires generally have the same diameter.
Packing method: Inside with paper pipe, outside with water-proof paper and plastic paper.
Packing: Wooden case.
If you need a little 80 mesh brass wire mesh, we can supply you with minimum order 1 lineal meter.
Anping Hairong Wire Mesh Factory produces wire cloth in all kinds of forms. The weaving is determined according to our customers, specific requirements, such as the material, the wire diameter, the size of the mesh, width and length.